Denon DVD-1800BD Manuel d'utilisateur télécharger pdf (Page 36)

Function Setup Function Setup

ENGLISH

• Settings with (*) are the default.

• Quick menu consists of the setting menus frequently used, and they are accompanied with

mark.

• For “HDMI RGB Setting”, select “Enhanced” if the black-white contrast is not clear. The setting is

effective only for HDMI RGB output.

• If you set to “1080p24” for “HDMI Video Resolution”, and the contents of the disc is not

compatible for 1080p24 frame, 1080p60 frame will be output.

• An individual picture on the screen is called as “Frame” , which consists of two separate images

called as “Field”. Some pictures may be blurred at the auto setting in “Still Mode” due to their

data characteristics.

• If the picture is not output properly to the display device because of the “HDMI Video

Resolution” or “Component Output” setting, press and hold B on the front panel for more than

5 seconds. Both settings will be reset to the default automatically.

• For “TV Aspect”, 4:3 squeeze function is not available during BD playback.

• If HDMI is connected, for video resolution for the component output, you can only select video

resolution that currently output from HDMI OUT or 480i.

• If the video resolution for the component output and HDMI video resolution does not match, the

video resolution for the component output will be switched to current HDMI output resolution.

COMPONENT VIDEO OUT jacks may not output any signals depend on the disc material.

• If you play back copy-protected DVD video, 480p signal will be output from the COMPONENT

VIDEO OUT jacks, when “Component Output” is set to “720p” or “1080i”.

• If connected display device does not support 1080p24 frame, “1080p24” in “HDMI Video

Resolution” will be displayed in gray and you cannot select the item.

• The setting items which are not available with current situation of this unit will be displayed in

gray and you cannot select the items.

• Even if “HDMI Select” is set to “YCbCr”, if the display device does not support YCbCr, RGB will be

output.

• If “HDMI Video Resolution” is set to “1080p” or “1080p24”, you cannot set “Component Output”.

䡵 Audio

• For how to select the setting items and options, refer to “Custom” on page 29.

• The default setting of the “BD Audio Mode” is “Mix Audio Output”. If you want to output only the

high quality primary audio, set “BD Audio Mode” to “HD Audio Output”.

Setting items Options

BD Audio Mode

For BD, select whether to output

the secondary and interactive

audio with primary audio if it is

available or only the primary

audio. Refer to “Setting the BD

Audio Mode” on page 23.

Mix Audio Output*:

Output the secondary and interactive audio with

primary audio if it is available.

HD Audio Output:

Output only the primary audio. Set this mode in order to

output Dolby Digital, Dolby Digital Plus, Dolby TrueHD,

DTS or DTS-HD sound of BD through HDMI connection.

HDMI Audio Out

Sets the audio format for the audio

output from the HDMI OUT.

HDMI Multi(Normal)*:

The multi-channel audio signals are output from the

HDMI OUT with a bitstream or LPCM.

HDMI Multi(LPCM):

The multi-channel audio signals are output from the

HDMI OUT with an LPCM.

• Refer to pages 33-35 for setting options.

HDMI 2ch:

The audio signals are output from the HDMI OUT with a

downmixed to 2ch LPCM.

Audio Mute:

Mutes the HDMI audio signal, and set the signal format

of the DIGITAL OUT.

• Refer to the “Digital Out Setting” on page 33 for setting

options.

Audio

BD Audio Mode

HDMI Audio Out

Down Sampling

DRC

Virtual Surround

Mix Audio Output

HDMI Multi (Normal)

Off

E5H60UD_EN.book Page 32 Thursday, August 21, 2008 1:54 PM

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 44 45

Commentaires sur ces manuels

Pas de commentaire

Denon DVD-1800BD Manuel d'utilisateur Page 36

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Denon DVD-1800BD