Denon DN-X1100 - DJ Mixer Manuel du propriétaire télécharger pdf (Page 12)



ENGLISH

Getting Started Connections Speciﬁcations

Replacing the Channel Fader

The Channel fader may be removed without any disassembly of

the DN-X1100 itself.

Pull out the Channel fader knob.

 Remove the ve outer screws

attaching the channel

fader plate and channel fader bracket assembly from

the front panel.

Remove the two screws attaching the channel

fader bracket assembly from chassis.

Pull the channel fader bracket assembly forward

and unplug the 4P cable from the connector on the

channel fader printing board.

Install the replacement assembly by reversing above

instructions.

Flex Fader Crossfader Slide

Torque Adjustment Procedure

Follow the procedure at “Replacing the Crossfader”

to remove the Crossfader from the set.

Move the lever so that the head of the Screw is

positioned at the hole in the case.

Turn the Screw using a screwdriver, move the lever

and adjust to the desired torque.

Reinstall the Crossfader following the removal

procedure in reverse order.

Fader Start

Crossfader

........

Screw

1 2 ... 7 8 9 10 11 12 13 14

Pas de commentaire

Denon DN-X1100 - DJ Mixer Manuel du propriétaire Page 12