Denon AVR-X3000 Manuel d'utilisateur télécharger pdf (Page 17)

- 17 -

COMMAND

PARAMETER

function example

PS BAS UP BASS UP/DOWN , direct change to **dB PSBAS UP<CR>

BAS DOWN **:00 to 99 by ASCII , 50=0dB PSBAS DOWN<CR>

BAS ** ---AVR-X3000 can be operated from -6 to +6(44 to 56) PSBAS 50<CR>

BAS ? Return PSBAS Status PSBAS ?<CR>

TRE UP TREBLE UP/DOWN , direct change to **dB PSTRE UP<CR>

TRE DOWN **:00 to 99 by ASCII , 50=0dB PSTRE DOWN<CR>

TRE ** ---AVR-X3000 can be operated from -6 to +6(44 to 56) PSTRE 50<CR>

TRE ? Return PSTRE Status PSTRE ?<CR>

DRC AUTO Dynamic Compression direct change PSDRC AUTO<CR>

DRC LOW PSDRC LOW<CR>

DRC MID PSDRC MID<CR>

DRC HI PSDRC HI<CR>

DRC OFF PSDRC OFF<CR>

DRC ? PSDRC ?<CR>

LFE UP LFE UP/DOWN , direct change to **dB PSLEE UP<CR>

LFE DOWN **:00 to 99 by ASCII , 00=0dB, 10=-10dB PSLFE DOWN<CR>

LFE ** ---AVR-X3000 can be operated from 0 to -10 PSLFE 10<CR>

LFE ? Return PSLFE Status PSLFE ? <CR>

EFF UP EFFECT UP/DOWN , EFFECT LEVEL direct change to **dB PSEFF UP<CR>

EFF DOWN **:00 to 99 by ASCII , 00=0dB, 10=10dB PSEFF DOWN<CR>

EFF ** ---AVR-X3000 can be operated from 1 to 15 PSEFF 10<CR>

EFF ? Return PSEFF Status PSEFF ?<CR>

DEL UP DELAY UP/DOWN , direct change to ***dB PSDEL UP<CR>

DEL DOWN ***:000 to 999 by ASCII , 000=0ms, 300=300ms PSDEL DOWN<CR>

DEL *** ---AVR-X3000 can be operated from 0 to 300 PSDEL ***<CR>

DEL ? Return PSDEL Status PSDEL ?<CR>

PS COMMAND : "*" parameter uses two or three ASCII characters. (see page6 J) section)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 46 47

Pas de commentaire

Denon AVR-X3000 Manuel d'utilisateur Page 17