Denon AVR-X3000 Manuel d'utilisateur télécharger pdf (Page 4)

- 4 -

NETWORK SETUP of AVR-X3000

>Procedure of Network Setup mode.

(1)Press SETUP MENU button, then Menu appears on FL-display(and GUI)

(2)Select “Setup Menu > Network > Settings ” .

(3)Set parameters described below.

<DHCP> "On"---Use this setting when DHCP server is on the local network.

"Off"---Use this setting when DHCP server is not on the local network.

<IP Address> When <DHCP> sets "Off”, please set IP address.

When <DHCP> sets "On”, you can confirm the IP address that is set by server.

<Subnet Mask> When <DHCP> sets "Off”, please set Subnet Mask.

When <DHCP> sets "On”, you can confirm the Subnet Mask that is set by server.

<Gateway> Set the address of Gateway when Gateway is on the local network.

Do not set this parameter when Gateway is not on the local network.

<Primary DNS> Do not set this parameter.

<Second DNS> Do not set this parameter.

<Proxy> Set this parameter "Off".

(1)Press SETUP MENU button, then Menu appears on FL-display (and GUI)

(2)Select “Setup Menu > Network > IP Control”

(3)Set parameters described below.

“Always On”---Use this setting when using the AVR-X3000 Connected in a network.

“Off In Standby”--- Use this setting when not using the AVR-X3000 connected in a network.

This setting is reducing the power consumption in the standby mode.

1 2 3 4 5 6 7 8 9 ... 46 47

Pas de commentaire

Denon AVR-X3000 Manuel d'utilisateur Page 4