Denon AVR-5805CI Manuel d'utilisateur Page 143
- Page / 214
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
143
Advanced Setup – Part 2
4
Press the CURSOR
FF
or
GG
button to set the
distance between the center speaker and
listening position.
Example: When the distance is set to 10.0 feet for the
center speaker
The distance changes in units of 1 foot or 0.1 foot each
time the button is pressed. Select the value closest to
the measured distance.
When “Step” is selected, you can select the unit of “1
ft (0.1 m)” or “0.1 ft (0.01 m)”.
When “Default Yes” is selected, then press the
CURSOR
FF
button to reset to the default values.
The difference of the distances set for the various
speakers must be 20.0 ft (6.0 m) or under. If an
inappropriate distance is set, “RELOCATE
BLINKING SP!” is displayed. In this case, move the
relevant speaker to the proper position as
indicated by the displayed value.
5
Press the ENTER button to enter the setting.
• The “Speaker Setup” menu reappears.
The AVR-5805CI automatically sets the optimum
surround delay time for the listening room.
Setting the Channel Level
• Use this setting to adjust so that the playback level between
the different channels is equal.
•From the listening position, listen to the test tones produced
from the speakers to adjust the level.
• The level of each channel should be adjusted to 75 dB (C-
weighted, slow meter mode) on a sound level meter at the
listening position.
If a sound level meter is not available adjust the channels by
ear so the sound levels are the same. Because adjusting the
subwoofer level test tone by ear is difficult, use a well
known music selection and adjust for natural balance.
1
Press the CURSOR
DD
or
HH
button to select
“Channel Level” at the “Speaker Setup”
menu, then press the
ENTER button.
• The “Channel Level” screen appears.
2
Press the CURSOR
FF
or
GG
button to select
“Auto” or “Manual”.
Auto:
Adjust the level while listening to the test tones
produced automatically from each speaker.
Example: When the “Auto” mode is selected
Manual:
Select the speaker from which you want to
produce the test tone to adjust the level.
- AVR-5805CI 1
- SAFETY PRECAUTIONS 2
- SAFETY INSTRUCTIONS 3
- Getting Started 4
- System Setup Menu 5
- Before using 7
- Cautions on installation 7
- Accessories 7
- Cautions on handling 8
- Inserting the batteries 8
- Part names and functions 10
- Front panel 10
- Remote control unit 13
- Easy Setup and Operation 14
- Speaker system layout 15
- Speaker connections 16
- Connections 17
- DVD player 18
- TV (Monitor) 19
- Auto Setup / Room EQ 20
- SETUP MIC jack on the front 21
- About the error message 26
- Connecting Other Sources 27
- (MONITOR OUT/ZONE2) 28
- TV tuner 30
- DVD recorder 32
- CD player 33
- Video deck 33
- CD recorder / 34
- MD recorder 34
- Turntable 34
- (MM cartridge) 34
- Connecting a tape deck 35
- DENON LINK connection 35
- Copyright Protection System 36
- Connecting IEEE1394 devices 38
- AM loop antenna assembly 39
- Connection of AM antennas 39
- Connecting the XM terminal 40
- ZONE2 connections 41
- Power amplifier 42
- Basic Operation 43
- MATER VOLUME 44
- SOURCE FUNCTION 44
- HOME THX 44
- VIDEO SOURCE 45
- DVD 45
- ON SCREEN button 46
- DIMMER button 46
- STATUS button 46
- INPUT MODE button 46
- Selecting the analog mode 47
- Selecting the EXT. IN mode 47
- ROOM EQ button 48
- SURROUND PARAMETER 54
- STANDARD 54
- Offset -4dB 55
- Dial.Norm 55
- SURROUND PARAMETER button 56
- ENTER or SURROUND PARAMETER 57
- USER MODE 58
- DENON original surround modes 60
- Tone defeat mode 63
- FUNCTION TUNING PRESET 66
- BAND TUNING – 70
- BAND button 71
- SEARCH button in the XM mode 73
- NUMBER buttons to enter the 73
- Internet radio function 74
- System requirements 74
- Personal Computer 75
- II or AMD processor, etc 75
- Advanced Operation 81
- MODE SELECTOR button for the 82
- RC SETUP button for at 82
- 9, 7, 5 button (9 84
- 1 button 85
- RC SETUP 86
- MODE SELECTOR 86
- ZONE2 playback 87
- ZONE2 5.1 channel system 88
- ZONE2 7.1 channel system 89
- ZONE2 STEREO/MONO system 90
- ZONE3 playback 91
- ZONE4 playback 92
- VIDEO SELET 94
- SYSTEM SETUP 94
- Test Tone 95
- Channel Level 95
- Fader function 96
- Calling the settings out 97
- SURROUND 98
- PARAMETER 98
- FUNCTION 100
- POWER switch 101
- STANDARD button and 101
- POWER switch on 101
- PHONES jack 101
- Advanced Setup – Part 1 102
- Setting the DENON LINK 104
- Auto Preset Memory 108
- Preset Skip 109
- Preset Name 109
- ENTER button 113
- IIx Cinema) 117
- Video Convert Mode (ZONE2) 123
- Audio Delay (ZONE2) 124
- Channel setup flow 126
- Connecting the preouts 128
- Bi-Amp connections 131
- Setup Lock 137
- User Memory 137
- Setting the IP Address 138
- Advanced Setup – Part 2 140
- DENON Microphone 150
- Troubleshooting 157
- Additional Information 159
- Surround back speakers 160
- Speaker setting examples 161
- Surround 163
- Dolby Surround 163
- DTS Digital Surround 164
- DTS 96/24 164
- DTS NEO:6 surround 164
- Home THX Cinema Surround 164
- Copyright protection system 166
- Surround modes and parameters 168
- MODE settings of ZONE2 173
- Specifications 174
- Tuner section 175
- Remote control unit (RC-1036) 175
- 10087, 10565 186
- SATELLITE 200
- TV/DVD Combination 2, 3 209
- TV/VCR Combination 3, 4 210
- TV/VCR/DVD Combination 2, 4 210
- CABLE/PVR Combination 1 210
- DBS/PVR Combination 1 211
- TOKYO, JAPAN 214
Produits connexes et manuels pour Récepteurs AV Denon AVR-5805CI
(63 pages)
(16 pages)
(42 pages)
© 2020, manymanuals.fr. Tous droits réservés | 1.517 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels