Denon DVD-2800II Manuel d'utilisateur télécharger pdf (Page 8)

ENGLISH

2 Sound output from the DVD-2800’s digital audio output connectors

DVD video

DVD audio

(video part only)

Audio recording format

Dolby Digital

Sound output

DTS

48 kHz

96 kHz

Video CD MPEG 1

• Linear PCM audio is the signal recording format used for music CDs.

While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit,

providing higher sound quality than music CDs.

• When “OFF” is selected, digital signals are not output from the digital audio output at this time.

(5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)

PB/CB

PR/CR

OPTICAL COAXIAL

VIDEO

OUT

COMPONENT

VIDEOOUT

S-VIDEO

OUT

DIGITAL OUT

(PCM/BITSTREAM)

AUDIO

OUT

VIDEO IN

✽ Set the “AUDIO SETUP” default setting as shown below.

(See page 23.)

• “DIGITAL OUT”

→ “PCM”

“LPCM SELECT” → “ON”

Playing DVDs with incorrect settings may result noise that

could damage your ears or the speakers.

• Set the “TV TYPE“ in “VIDEO SETUP“ in “SETUP“ comply

with your TV's video format. When the TV is PAL formated,

set to PAL. (See page 22.)

DVD-2800

Digital audio input connector (COAXIAL)

Digital audio input connector (OPTICAL)

(6) Connecting to a Stereo Component

PB/CB

PR/CR

OPTICAL COAXIAL

VIDEO

OUT

COMPONENT

VIDEOOUT

S-VIDEO

OUT

DIGITAL OUT

(PCM/BITSTREAM)

AUDIO

OUT

VIDEO IN

DVD-2800

Stereo component

NOTE:

• Set the “TV TYPE“ in “VIDEO SETUP“ in “SETUP“ to comply with your TV's video format. When the TV is PAL formated,

set to PAL. (See page 22.)

PART NAMES AND FUNCTIONS

(1) Front Panel

See page 3.

Power button

• Press once to turn the power on.

• Press again to set to the “OFF” position and turn the

power off.

• Set the power to the standby mode by pressing the

POWER button on the remote control unit while the

power is on.

• Turn the power on from the standby mode by

pressing the POWER button on the remote control

unit.

Power indicator

• This indicator lights when the power is on and when

the power is in the standby mode.

HDCD indicator

• This indicator lights when playing discs recorded in

HDCD

format. (NOTE 1)

Progressive Scan indicator

• Lights when progressive is selected as the video

output.

Disc tray

• Load discs here. (See page 10.)

• Press the OPEN/CLOSE button

y to open and close

the disc tray.

• The disc tray is also closed when the PLAY button

is pressed.

OPEN/CLOSE button (5 OPEN/CLOSE)

• Press this button to open and close the disc tray.

(See page 10.)

PLAY button (1 PLAY)

• Press this button to play the disc. (See page 11.)

STILL/PAUSE button (3 STILL/PAUSE)

• Press this button to pause images or music and to

play images frame by frame. (See page 12.)

STOP button (2 STOP)

• Press this to stop the disc. (See page 12.)

Skip button (8)

• Press this to move back to the beginning of the

current track (or chapter).

• Press again to move back to the beginning of the

previous track (or chapter). (See page 12.)

Slow/Search button (6)

• Press this to set the slow play mode and to search in

the reverse direction. (See page 12.)

Skip button (9)

• Press this to move ahead to the beginning of the next

track (or chapter). (See page 12.)

Slow/Search button (7)

• Press this to set the slow play mode and to search in

the forward direction. (See page 12.)

Remote control sensor

Display

• Information on the disc that is currently playing is

shown on the display. (See page 9.)

NOTES:

In some cases, track numbers may not be assigned automatically when conducting digital recording onto a connected

component while playing a CD on the DVD-2800.

•

When conducting digital recording onto an MD recorder, use the editing function to divide the tracks after recording is

completed.

• When conducting digital recording onto a CD recorder, set the CD recorder’s recording setting to manual and assign the

track numbers (track marks) manually during recording.

Linear PCM

Digital out : Normal

Digital out : PCM conversion

Digital out : Normal

Digital out : PCM conversion

LPCM conversion mode :OFF

LPCM conversion mode :ON

LPCM conversion mode :OFF

CP : ON

CP : OFF

Music CD Linear PCM

MP3 CD MP3

Refear to

page

Digital audio data output

Dolby Digital bitstream

2 channels PCM data (48 kHz/16 bit)

DTS bitstream

48 kHz/16 bit ~ 24 bit PCM

48 kHz/16 bit PCM

No output data (when copy protected)

96 kHz PCM (when not copy protected)

44.1 kHz/16 bit PCM

32 ~ 48 kHz/16 bit PCM

MPEG audio

Digital out : Normal

Digital out : PCM conversion

2 channel PCM data (48 kHz/16 bit)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 85 86

Commentaires sur ces manuels

Pas de commentaire

Denon DVD-2800II Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Denon DVD-2800II